OFT first pull log feedback appreciated

[Red Barchetta]

Longtime fan and follower of the forum and OFT. I have been planning to get the OFT for my BRZ and finally bought one recently for all the current features and still to be develop features. I am new to tuning and would appreciate any feedback to the following log.

http://datazap.me/u/redbarchetta/fir...=0&data=1-9-11

This is the first log I pulled on OFT after a few days for driving around on the stage 1 93 map. I am stock with a K & N filter running 93 oct fuel. This was a 3 gear pull. Thanks in advance for the feedback.

And lastly, I would like to thank Shiv for the tunes and wonderful product and Steve99 documenting and sharing you knowledge of tuning.

[phrosty]

Well your IAM is 1 (good) and your AFR is about right, but really can't tell much without adding FBKC and FLKC. Need to change the default logging params, they aren't super useful.

[Red Barchetta]

I did not change the defaults. Will add those parameters on the next log. Are there any other I should add? And what values should I expect? Thank you.

[Red Barchetta]

I see Steve99 post for ecu logging. I will re-read that post and log. Thanks.

[Shiv@Openflash]

That log looks really nice. You can tell what FLKC is by looking at KC learning (which was logged). And it all looks dandy