Aftermarket Lugs on Stocks

[Hentai]

So my friend got me these lug nuts..
I still have stock wheels and I'm wondering if I change them to these, will it be a bad idea?

http://www.ebay.com/itm/D1-SPEC-JDM-...torefresh=true

[8R6]

It'll fit. I would avoid aluminum tho

[Hentai]

Originally Posted by 8R6

It'll fit. I would avoid aluminum tho

Mmm true.. heard they strip after time

But are the lug nuts head different from the stock ones? people tell me that aftermarket lugnuts wont sit right on stock wheels, and if I keep driving it for a while they're going to fall off later in time.

Is that true?

Sorry im still a nooby at this.. ;__;

[8R6]

Originally Posted by Hentai

Mmm true.. heard they strip after time

But are the lug nuts head different from the stock ones? people tell me that aftermarket lugnuts wont sit right on stock wheels, and if I keep driving it for a while they're going to fall off later in time.

Is that true?

Sorry im still a nooby at this.. ;__;

they usually are different, but our stock wheels/lugs use a tapered/conical seat so the stock lugs and aftermarket "tuner" lugs have the same 60deg taper.

[Hentai]

Originally Posted by 8R6

they usually are different, but our stock wheels/lugs use a tapered/conical seat so the stock lugs and aftermarket "tuner" lugs have the same 60deg taper.

Thank you so much, just want to be safe out there

[SkAsphalt]

I have aluminum lugs, just hand thread them, tighten and torque by hand also. No electronics or air tools, you will be fine.