Invidia exhaust not lining up? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

dobbrz · 03-20-2014, 04:24 AM

I can get pictures for those who need them but I will try and describe it first. One of the tips (passenger side) sticks out a few inches further than the driver side.
I searched and couldn't find any info on if anybody else experienced this. I have tried to take it off the hangers and unbolt it and put it back on but it still ends up sticking out noticeably further on the passenger side of the car. Obviously not a huge deal but if anybody else has noticed this as well and/or has any suggestions let me know. Could it just be an issue with the exhaust being made not exactly right? Don't want to jump to conclusions though.

86viper · 03-20-2014, 08:23 AM

Q300 or N1?

My N1 fit perfectly, bolted straight up

FR-S Matt · 03-20-2014, 08:43 AM

I've fit both systems perfectly. You might want to loosen up the catback and align it where it should be, check the hangers, then re-tighten.

dobbrz · 03-20-2014, 03:58 PM

N1. Okay thanks guys I will try again.

03-20-2014, 04:24 AM	#1
dobbrz Senior Member Join Date: Jan 2013 Drives: RB v1 FRS Location: Vancouver, BC Posts: 165 Thanks: 40 Thanked 79 Times in 44 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Invidia exhaust not lining up? I can get pictures for those who need them but I will try and describe it first. One of the tips (passenger side) sticks out a few inches further than the driver side. I searched and couldn't find any info on if anybody else experienced this. I have tried to take it off the hangers and unbolt it and put it back on but it still ends up sticking out noticeably further on the passenger side of the car. Obviously not a huge deal but if anybody else has noticed this as well and/or has any suggestions let me know. Could it just be an issue with the exhaust being made not exactly right? Don't want to jump to conclusions though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
INVIDIA >>SUPER SALE THREAD<< - Invidia N1 - Invidia Q300 - Invidia Front Pipes -	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	629	12-11-2016 10:21 PM
Bumper not lining up near fender?	xjohnx	Cosmetic Modification (Interior/Exterior/Lighting)	229	10-15-2016 01:09 PM
WTB: invidia q300 exhaust frs/brz	Pintobeangt86	Want-To-Buy Requests	0	03-03-2014 12:53 PM
SU003-01220 Plastic Push Pin Part Number For Fender Lining	FR-S Matt	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	5	09-08-2013 10:17 AM
Invidia Exhaust	xxthrillxx	Southern California	1	10-07-2012 02:29 AM

03-20-2014, 08:23 AM	#2
86viper Member Join Date: Nov 2013 Drives: 2013 Toyota 86 GTS Location: Australia Posts: 76 Thanks: 2 Thanked 30 Times in 22 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Q300 or N1? My N1 fit perfectly, bolted straight up

03-20-2014, 03:58 PM	#4
dobbrz Senior Member Join Date: Jan 2013 Drives: RB v1 FRS Location: Vancouver, BC Posts: 165 Thanks: 40 Thanked 79 Times in 44 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	N1. Okay thanks guys I will try again.

User Name		Remember Me?
Password