Enkei RPF01 help? Post pics please! - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Trmx2 · 01-17-2014, 01:12 AM

So I've scoured the forum and have seen a few rpf1 on the twins but want to know if anyone is running 18x8 FRONT and 18x9.5 rear in the SBC finish (but please post pics of other finishes) if you have a raven or asphalt twin please post! Also, if you're on springs with a 1" drop please post.

I'm looking for: no rubbing, close to flush, no spacers, on springs with a 1" drop and either natural camber or just slight negative camber.

Please post pics!

Team STILLEN · 01-17-2014, 01:33 AM

There is a whole guide to how to calculate flush offsets for different width wheels. After that you can look up available offsets on Enkei's website. As for pictures you can keep searching or you might get lucky and someone will post some here.

Trmx2 · 01-17-2014, 01:51 AM

Quote:

Originally Posted by Team STILLEN

There is a whole guide to how to calculate flush offsets for different width wheels. After that you can look up available offsets on Enkei's website. As for pictures you can keep searching or you might get lucky and someone will post some here.

Yeah I've seen the fitment calculator and all that but it's still a little confusing to be honest. I've also scoured the wheel gallery and searching hasn't proved to be much help unfortunately.

ZionsWrath · 01-17-2014, 03:49 AM

Why 8 in front?

Dezoris · 01-17-2014, 03:56 AM

17x8" 235 10mm drop 45 offset

Trmx2 · 01-17-2014, 03:56 AM

Quote:

Originally Posted by ZionsWrath

Why 8 in front?

Wanted to do staggered fitment maybe and I don't think the SBC comes in 8.5 or 9 in our 5x100 bolt pattern.

I may just do a square 17x9 setup I'm debating between that and a staggered setups.

Also the 18x8 in front would prevent any rubbing issues that may happen on just springs. But I'd prefer 8.5

Trmx2 · 01-17-2014, 05:05 AM

Quote:

Originally Posted by Dezoris

17x8" 235 10mm drop 45 offset

Nice what are you dropped on springs or coilovers? Fitment looks great!

s2d4 · 01-17-2014, 05:24 AM

Quote:

Originally Posted by Trmx2

Nice what are you dropped on springs or coilovers? Fitment looks great!

You may as well get the flat faced rather than getting the bulge.

17x9 +35 235/40/17 (My tyre choice actually runs really wide compare to most of the same tyre spec) with -1 camber will not give you any issues.

Trmx2 · 01-17-2014, 02:27 PM

Quote:

Originally Posted by s2d4

You may as well get the flat faced rather than getting the bulge.

17x9 +35 235/40/17 (My tyre choice actually runs really wide compare to most of the same tyre spec) with -1 camber will not give you any issues.

There's a flat faced choice? I thought the spokes all had a little bit of a bulge in them.

I like this setup a lot though. What are you dropped on?

MightyMeeple · 01-17-2014, 02:30 PM

If you go with the 9-inch width, the spokes on this wheel look more flat and less bulge. I haven't seen the SBC in an 8-inch width...so either isn't available or would be a special order anyway.

Trmx2 · 01-18-2014, 04:06 AM

Quote:

Originally Posted by MightyMeeple

If you go with the 9-inch width, the spokes on this wheel look more flat and less bulge. I haven't seen the SBC in an 8-inch width...so either isn't available or would be a special order anyway.

Yeah I definitely think it's special order and I have no idea how to go about doing that tbh. :/

Trmx2 · 01-19-2014, 05:15 AM

Bump

jaymeister · 01-19-2014, 10:33 AM

Not really what you're asking but somewhat a similar setup to what you're asking.
17x8F 245/40
17x9R 255/40
+35 all around offset

Hope this helps.

fooddude · 01-19-2014, 01:48 PM

Wow...red on white looks clean.

01-17-2014, 01:12 AM	#1
Trmx2 Senior Member Join Date: Nov 2013 Drives: 2014 Raven FR-S 6spd Location: Hollywood, Florida Posts: 277 Thanks: 124 Thanked 63 Times in 47 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Enkei RPF01 help? Post pics please! So I've scoured the forum and have seen a few rpf1 on the twins but want to know if anyone is running 18x8 FRONT and 18x9.5 rear in the SBC finish (but please post pics of other finishes) if you have a raven or asphalt twin please post! Also, if you're on springs with a 1" drop please post. I'm looking for: no rubbing, close to flush, no spacers, on springs with a 1" drop and either natural camber or just slight negative camber. Please post pics!

01-17-2014, 01:33 AM	#2
Team STILLEN Mark @ STILLEN Join Date: Dec 2012 Drives: 2015 Subaru BRZ Location: Costa Mesa, California Posts: 170 Thanks: 201 Thanked 148 Times in 73 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	There is a whole guide to how to calculate flush offsets for different width wheels. After that you can look up available offsets on Enkei's website. As for pictures you can keep searching or you might get lucky and someone will post some here. __________________ \| Mark Dorman \| Performance Specialist \| markd@stillen.com\| IG @Mark_STILLEN \| www.STILLEN.com

01-17-2014, 03:56 AM	#5
Dezoris Senior Member Join Date: Aug 2012 Drives: FR-S Location: IL Posts: 2,857 Thanks: 519 Thanked 2,998 Times in 1,095 Posts Mentioned: 159 Post(s) Tagged: 1 Thread(s)	17x8" 235 10mm drop 45 offset __________________ SAVAGEGEESE

01-17-2014, 02:30 PM	#10
MightyMeeple Slower than Fast Join Date: Feb 2013 Drives: BRZ Limited 6MT Location: Research Triangle Park, NC Posts: 431 Thanks: 290 Thanked 220 Times in 132 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	If you go with the 9-inch width, the spokes on this wheel look more flat and less bulge. I haven't seen the SBC in an 8-inch width...so either isn't available or would be a special order anyway. __________________ *Build Thread*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Springs! Post your Pics!!	stevohl	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	113	11-10-2016 03:30 PM
Can't post pics with tapatalk	AirborneDeth	Site Announcements / Questions / Issues	16	04-06-2015 02:45 PM
Post your winter pics	kidgogeta	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	13	12-16-2013 02:52 PM
FS/ 17x7 Enkei RPF01 and 225/45/17 Dunlop DZII	SVThis	Wheels and Tires	12	11-14-2013 10:20 PM
Raven Only! Post Pics!	imlevinit	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	1	07-06-2012 08:41 PM

01-17-2014, 03:49 AM	#4
ZionsWrath Thanks Join Date: Apr 2013 Drives: BRZ Location: NY Posts: 4,163 Thanks: 5,989 Thanked 3,100 Times in 1,498 Posts Mentioned: 38 Post(s) Tagged: 3 Thread(s)	Why 8 in front?

01-19-2014, 05:15 AM	#12
Trmx2 Senior Member Join Date: Nov 2013 Drives: 2014 Raven FR-S 6spd Location: Hollywood, Florida Posts: 277 Thanks: 124 Thanked 63 Times in 47 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Bump

01-19-2014, 10:33 AM	#13
jaymeister Yo dawg! Join Date: Sep 2012 Drives: I have a car..? Location: United States Posts: 129 Thanks: 30 Thanked 22 Times in 18 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Not really what you're asking but somewhat a similar setup to what you're asking. 17x8F 245/40 17x9R 255/40 +35 all around offset Hope this helps.

01-19-2014, 01:48 PM	#14
fooddude Banned Join Date: Dec 2013 Drives: 04 Toyota Tacoma Prerunner Reg Cab Location: LA > SF > NYC > OC Posts: 943 Thanks: 556 Thanked 268 Times in 200 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Wow...red on white looks clean.

User Name		Remember Me?
Password