Build your own baffled Catch can (mishimoto style)

[Escobar89]

Hello,

Thought i could do a guide how to make your own baffled Catch can system. I have been searching a lot about what would be the best solution, depending on if you use FI or NA. I drive my car NA (oft + ofh currently set with the E85 tune), so for my car i think i only need to have a catch can from the pcv system. If i had turbo i think i would have mounted it to the crankcase instead.

I bought a 2-way baffled catch can on Ebay, it's complety universal and are extremly similiar to the mishimoto can.
I ordered a couple of hose fittings since we are using MM instead of inches. But those fittings i used was:
* 10mm for the pcv to inlet
* 12mm for the intake manifold to outlet.
I bought some 10/12mm PVC hose from a local part dealer and then bulided me a attachment/holder made of 2mm stainless steel. I'm not very good at English, so i thought that you might understand better with pictures.
Total cost of everything is an estimated 40 USD.

Feel free to ask me anything!

[8RZ]

Good job on making your own bracket too, nice work.

[ML]

step 1: buy catch can
step 2:??????
step 3: profit