Hats and Mats - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Clembo · 03-14-2013, 09:22 AM

Being a newcomer I'm still trying to find things many others already have or know about. But here are two things I wanted to mention for others in my situation.

FR-S Hats - I saw these on early posts and guess they were available during the reveals. Have not seen many for sale since, either here or on eBay. But they CAN be ordered through a Toyota dealer. Scion part # is 00113-71621-63760, Warren # is FRCAP430. List price is $25 but most dealers will sell at net of $13.75. Mine even gave me one for free. Nice hat too...

Next are replacement floor mats - Noticed my factory FR-S mats showing quite a bit of wear in just 500 miles. Went to my dealer to order an extra set and found they are only available individually - fronts are $108 each, rears are $40 each, list. Wow, no way I was doing that! I found and ordered these from Spoonz Auto so I could store my originals away.

These mats were $99 shipped (bought on eBay), were well packed and are very nice with a thick heel pad. Fit is absolutely like stock and they appear to be well made. Heavier and thicker than the originals, one of these weighs more than all four stock mats! The color is a little blacker than the 'charcoal' of our interiors but I think they still look good. And the red edging sets them off nicely. Might be a good alternative for BRZ owners who don't like their silver edging as well.

I'm very pleased with these mats and will sent this post to Spoonz Auto, perhaps they would be interested in becoming a supporting vendor here.

bcj · 03-14-2013, 03:11 PM

The Toyota / Scion dealer I got my FR-S at had the hats in various colors in the Dealer Do-Dad kiosk.
Also jackets, windbreakers, touques, scarves and do-rags. All branded. Kinda ... meh.

May sneak in and buy a hat though 8)

MirthScout · 03-14-2013, 03:19 PM

The Weathertech FloorLiner DigitalFit mats are the best I've ever seen.
h ttp://www.weathertech.com/scion/2013/fr-s/floorliner-digitalfit/

There is a thread on here somewhere discussing them.

zaptorque · 03-14-2013, 03:26 PM

Quote:

Originally Posted by Clembo

Do the front mats lock in place, hard to tell by this picture?

campy · 03-14-2013, 03:33 PM

There was that diy thread where someone just cut up a piece of rubber welcome mat and velcro'd it to his stock floor mat, and I thought that was a good idea.

Here: http://www.ft86club.com/forums/showthread.php?t=25376

Mandy · 03-14-2013, 05:28 PM

I like my hat more:

zaptorque · 03-14-2013, 05:33 PM

Quote:

Originally Posted by Mandy

I like my hat more:

Where did you get this? I must have

zaptorque · 03-14-2013, 05:34 PM

Quote:

Originally Posted by Mandy

I like my hat more:

nvm, found it: http://www.scionracingstore.com/hatsandsocks.aspx

Burninator · 03-14-2013, 09:24 PM

Quote:

Originally Posted by Clembo

FR-S Hats - I saw these on early posts and guess they were available during the reveals. Have not seen many for sale since, either here or on eBay. But they CAN be ordered through a Toyota dealer. Scion part # is 00113-71621-63760, Warren # is FRCAP430. List price is $25 but most dealers will sell at net of $13.75. Mine even gave me one for free. Nice hat too...

http://optomizescion.com/ProductsDet...px?ProdID=5530

I showed the parts guy at my dealer that page and (after about a week) got a call saying it and the FR-S keychain I wanted was in. Paid about $15 and some change after tax for both.

Clembo · 03-14-2013, 09:47 PM

Quote:

Originally Posted by zaptorque

Do the front mats lock in place, hard to tell by this picture?

They lock exactly like the factory mats. And the edges are spiral bound like the factory mats also, just in red instead of charcoal. The more I drive with 'em in the car the more I like 'em.

Quote:

Originally Posted by MirthScout

The Weathertech FloorLiner DigitalFit mats are the best I've ever seen.
h ttp://www.weathertech.com/scion/2013/fr-s/floorliner-digitalfit/

There is a thread on here somewhere discussing them.

I'll be switching to Weathertech for next winter, these are for summer when a softer touch is nice!

Brzetto · 03-14-2013, 10:09 PM

The BRZ needs a few hats too.

Gost · 03-14-2013, 10:14 PM

Wonder if there are any fitted, or at least flexfitted hats.

Brzetto · 03-14-2013, 10:18 PM

Imo flexfit sucks, adjustable is the way to go.

Gost · 03-14-2013, 10:30 PM

To each their own. I only prefer the flexfit because I don't like the gap in the back. I sometimes wear my hat backwards depending on what I'm doing.

03-14-2013, 09:22 AM	#1
Clembo 'Senior' Junior Member Join Date: Mar 2013 Drives: 13 FR-S,08 Mustang Bullitt,06 MX-5 Location: Southeastern CT Posts: 389 Thanks: 117 Thanked 213 Times in 122 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Hats and Mats Being a newcomer I'm still trying to find things many others already have or know about. But here are two things I wanted to mention for others in my situation. FR-S Hats - I saw these on early posts and guess they were available during the reveals. Have not seen many for sale since, either here or on eBay. But they CAN be ordered through a Toyota dealer. Scion part # is 00113-71621-63760, Warren # is FRCAP430. List price is $25 but most dealers will sell at net of $13.75. Mine even gave me one for free. Nice hat too... Next are replacement floor mats - Noticed my factory FR-S mats showing quite a bit of wear in just 500 miles. Went to my dealer to order an extra set and found they are only available individually - fronts are $108 each, rears are $40 each, list. Wow, no way I was doing that! I found and ordered these from Spoonz Auto so I could store my originals away. These mats were $99 shipped (bought on eBay), were well packed and are very nice with a thick heel pad. Fit is absolutely like stock and they appear to be well made. Heavier and thicker than the originals, one of these weighs more than all four stock mats! The color is a little blacker than the 'charcoal' of our interiors but I think they still look good. And the red edging sets them off nicely. Might be a good alternative for BRZ owners who don't like their silver edging as well. I'm very pleased with these mats and will sent this post to Spoonz Auto, perhaps they would be interested in becoming a supporting vendor here. __________________ "You'll never know if you don't try" - Shinroko Momose

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KW V3s don't fit Whiteline COM C top hats	eleu2166	AUSTRALIA	46	05-13-2013 09:52 AM
do carpet mats come with the BRZ?	Joobacca	BRZ First-Gen (2012+) — General Topics	16	05-18-2012 10:27 PM

03-14-2013, 03:19 PM	#3
MirthScout Member Join Date: Jan 2013 Drives: Scion FR-S MT Hot Lava Location: Virginia Posts: 12 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	The Weathertech FloorLiner DigitalFit mats are the best I've ever seen. h ttp://www.weathertech.com/scion/2013/fr-s/floorliner-digitalfit/ There is a thread on here somewhere discussing them.

03-14-2013, 03:33 PM	#5
campy No rice, no life Join Date: Dec 2012 Drives: 2013 Asphalt FR-S Location: Jersey Shore Posts: 1,143 Thanks: 266 Thanked 1,019 Times in 388 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	There was that diy thread where someone just cut up a piece of rubber welcome mat and velcro'd it to his stock floor mat, and I thought that was a good idea. Here: http://www.ft86club.com/forums/showthread.php?t=25376

03-14-2013, 05:28 PM	#6
Mandy I came from a motorbike Join Date: Jan 2013 Drives: Firestorm 2013 FR-S 6MT Location: FL, US Posts: 447 Thanks: 243 Thanked 390 Times in 124 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	I like my hat more:

03-14-2013, 10:09 PM	#11
Brzetto Senior Member Join Date: Feb 2013 Drives: 4 wheels Location: Earth Posts: 1,024 Thanks: 117 Thanked 332 Times in 205 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	The BRZ needs a few hats too.

03-14-2013, 10:18 PM	#13
Brzetto Senior Member Join Date: Feb 2013 Drives: 4 wheels Location: Earth Posts: 1,024 Thanks: 117 Thanked 332 Times in 205 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Imo flexfit sucks, adjustable is the way to go.

User Name		Remember Me?
Password