End Links - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Chen · 02-13-2013, 03:35 PM

So my aftermarket endlinks are shot. I was curious If the OEM ones will work or if they would be to long.

xwd · 02-13-2013, 03:44 PM

What brand? With some of the budget coilovers out there they will be too long. You can get decent adjustable front endlinks from both Hotchkis and Whiteline.

fatoni · 02-13-2013, 03:46 PM

Quote:

Originally Posted by Chen

So my aftermarket endlinks are shot. I was curious If the OEM ones will work or if they would be to long.

how did you ruin endlinks that fast? also, there is no way anybody can answer that question without you providing any information. its probably pretty cheap to just rebuild the endlinks. why dont you just swap them out and see how it goes? endlinks arent hard to get at.

chulooz · 02-13-2013, 03:55 PM

In to hear how you busted your endlinks, who made them?

Chen · 02-13-2013, 03:55 PM

Quote:

Originally Posted by dwx

What brand? With some of the budget coilovers out there they will be too long. You can get decent adjustable front endlinks from both Hotchkis and Whiteline.

I got the stance coils. I looked at some whitelines. But I was worried about length.

Quote:

Originally Posted by fatoni

how did you ruin endlinks that fast? also, there is no way anybody can answer that question without you providing any information. its probably pretty cheap to just rebuild the endlinks. why dont you just swap them out and see how it goes? endlinks arent hard to get at.

I bought used coilovers. and the end links I received looked like there was an impact gun used on them so now they don't tighten all the way and I hear clinking noises when driving on crappy roads.

Chen · 02-13-2013, 03:58 PM

Quote:

Originally Posted by chulooz

In to hear how you busted your endlinks, who made them?

I personally didn't. I'm just here to get info on how to fix them. I was told the end links I have are usable, and if I can get past the noise. I won't have to worry about it.

stockysnail · 02-13-2013, 04:51 PM

I have the rear Perrin poly endlinks and they are working good. They haven't made a front endlink yet. For the front I'm just using the stock front ones though. Perhaps the Whiteline front endlinks would be good. I'm not dropped as low as you as I'm just at 1".

Chen · 02-13-2013, 06:20 PM

Quote:

Originally Posted by stockysnail

I have the rear Perrin poly endlinks and they are working good. They haven't made a front endlink yet. For the front I'm just using the stock front ones though. Perhaps the Whiteline front endlinks would be good. I'm not dropped as low as you as I'm just at 1".

at this moment i'm just trying to figure out if the OEM ones will work. I might just pick up the whiteline endlinks if it doesn't work out tho.

OrbitalEllipses · 02-13-2013, 06:23 PM

2008+ WRX/STI rear endlinks work for the rear of this car, even if not advertised as 86 fitment.

Kartboy and his endlinks have been in the game since '99.

stockysnail · 02-13-2013, 06:34 PM

Quote:

Originally Posted by Chen

at this moment i'm just trying to figure out if the OEM ones will work. I might just pick up the whiteline endlinks if it doesn't work out tho.

I wouldn't risk it if you've dropped your car 2". They have too much preload tension on them more than likely, thus making their lifespan much shorter. That's my mildly educated guess anyway.

jamal · 02-13-2013, 06:35 PM

Seconding Kartboy for rears. My KB endlinks are going on 7 years old now.

Not sure what is out there for the front.

Chen · 02-13-2013, 06:43 PM

I was told the OEM ones would work. I just wanted to make sure they were the same length.

Turn in Concepts · 02-13-2013, 07:43 PM

Kartboy rears for the rears.

Fronts are a crapshoot right now until we or Tom can figure something out.

Chen · 02-13-2013, 09:04 PM

Quote:

Originally Posted by Turn in Concepts

Kartboy rears for the rears.

Fronts are a crapshoot right now until we or Tom can figure something out.

agreed. -_-

02-13-2013, 03:35 PM	#1
Chen Regional Moderator Join Date: Aug 2012 Drives: 00-AP1 20-A90 06-Z33 07-FA5 93-NA1 Location: Portland, OR Posts: 4,633 Thanks: 85 Thanked 1,278 Times in 856 Posts Mentioned: 309 Post(s) Tagged: 0 Thread(s)	End Links So my aftermarket endlinks are shot. I was curious If the OEM ones will work or if they would be to long.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Links to frs for sale? Please help	DBacon1052	Scion FR-S / Toyota 86 GT86 General Forum	17	01-18-2013 06:41 PM
Links to used FR-S	DBacon1052	Scion FR-S / Toyota 86 GT86 General Forum	0	01-18-2013 12:12 AM
Rear Toe Links?	Supermassive	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	11	11-05-2012 06:29 PM
Wheel reference links	JDLM	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	10	02-27-2012 04:22 AM

02-13-2013, 03:44 PM	#2
xwd Senior Member Join Date: Feb 2012 Drives: 2013 DGM Subaru BRZ (Subie #9) Location: ATL, US Posts: 2,667 Thanks: 123 Thanked 861 Times in 552 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	What brand? With some of the budget coilovers out there they will be too long. You can get decent adjustable front endlinks from both Hotchkis and Whiteline.

02-13-2013, 03:55 PM	#4
chulooz Registered you sir Join Date: Feb 2010 Drives: 99 impreza coupe Location: DC / CT Posts: 1,666 Thanks: 259 Thanked 380 Times in 207 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	In to hear how you busted your endlinks, who made them?

02-13-2013, 06:23 PM	#9
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,890 Times in 2,903 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	2008+ WRX/STI rear endlinks work for the rear of this car, even if not advertised as 86 fitment. Kartboy and his endlinks have been in the game since '99.

02-13-2013, 06:35 PM	#11
jamal Senior Member Join Date: Nov 2011 Drives: Legacy GT Location: compton Posts: 534 Thanks: 9 Thanked 367 Times in 205 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Seconding Kartboy for rears. My KB endlinks are going on 7 years old now. Not sure what is out there for the front.

02-13-2013, 06:43 PM	#12
Chen Regional Moderator Join Date: Aug 2012 Drives: 00-AP1 20-A90 06-Z33 07-FA5 93-NA1 Location: Portland, OR Posts: 4,633 Thanks: 85 Thanked 1,278 Times in 856 Posts Mentioned: 309 Post(s) Tagged: 0 Thread(s)	I was told the OEM ones would work. I just wanted to make sure they were the same length.

02-13-2013, 07:43 PM	#13
Turn in Concepts Senior Member Join Date: Oct 2012 Drives: BRZ Location: Cincinnati, OH Posts: 336 Thanks: 15 Thanked 123 Times in 68 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Kartboy rears for the rears. Fronts are a crapshoot right now until we or Tom can figure something out.

User Name		Remember Me?
Password