OFT, OFH, broken Nameless Axleback (and some other bits)

[DrButtDrugs]

Edit: That's all folks!



Hey folks, I traded my car away and now I have some stuff sitting around.

Sold - OpenFlash Header (v1) w/ brand new OEM gaskets ($16 value )
Sold - OpenFlash Tablet (v1) w/ USB-OBDII cable, USB-USB cable, original Vishnu Tuning sticker
Sold - Nameless Axleback w/ a story (2x Nameless stiffer exhaust hangers included, $24 value!):

I've got a 2.5'' piped 5'' muffler Nameless Axleback that needs some loving that I can't give it. The baffling insert inside the driver-side muffler has come apart from the can itself. It rattles very annoyingly between 2.5k-3k rpm; you do not want to put this on your car in its current state. Blue tips.

It's an amazing sounding exhaust though, so if you have access to some metalworking/welding tools or know a guy that does, here's a way to get one of the best sounding axlebacks for this car on the cheap. I'd probably just weld some straight pipe in the place of the muffler, but that's up to you.

I'm not sure if you can tell from the video that it's only the left muffler but the right one is fine and dandy.

Other stuff not worth its own post:

Sold - Tow hook license plate mount (this one)
Sold - Very yellow fog light bulbs
Sold - Bright white reverse light bulbs

[Grüven]

PM sent

[Suzuyans]

Is the Axleback for the 13-16 MY?

[DrButtDrugs]

Yes it's a first gen Axleback. I also forgot to mention that any shipping would be at the buyers expense, if you are within a reasonable distance from Baltimore I'm willing to travel a bit to meet.

[OrbitalFaps]

pm sent

[FRSBRZGT86FAN]

Originally Posted by DrButtDrugs

Yes it's a first gen Axleback. I also forgot to mention that any shipping would be at the buyers expense, if you are within a reasonable distance from Baltimore I'm willing to travel a bit to meet.

I can vouch for the axleback, it's a really nice exhaust, surprised it fell apart on yours. Did you consider contacting nameless to repair it first?

[DrButtDrugs]

Originally Posted by FRSBRZGT86FAN

I can vouch for the axleback, it's a really nice exhaust, surprised it fell apart on yours. Did you consider contacting nameless to repair it first?

Yeah I did but because I'm not the original owner they weren't super inclined to take that on

[DrButtDrugs]

OFT and license plate mount sold - OP updated. All PMs have been replied to.

[DrButtDrugs]

Header sale is pending

[kberkel]

Originally Posted by DrButtDrugs

Yeah I did but because I'm not the original owner they weren't super inclined to take that on

I'm in the same situation (2nd owner, baffles came loose).

Reponse I got from Nameless:
"Unfortunately we dont make those mufflers anymore and haven't for years. Since then that entire axleback design and pipe routing has changed and we dont even have the jig to repair them anymore. So even if we did sell you our center inlet and exit mufflers they wouldn't work at all."

On their newer axlebacks, the muffler inlet/outlet is centered, not offset.

GLWS!

[DrButtDrugs]

Yeah that's pretty close to what they said to me. I'm willing to bet the newer mufflers would fit just fine in there but not having a jig would certainly complicate it.

[DrButtDrugs]

Axleback sold, OFH sale pending

[DrButtDrugs]

Errything's gone, thanks for your interest everyone!