18x9 42offset on H&R super sport springs - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Veeoh · 02-17-2017, 10:05 AM

So I'm getting ready to get my first set of summer wheels. I am looking at the Bremmer Kraft br10. 18x9 42. I'm just wondering if I would have any fitment problems with my car being lowered 1.2f and 1.4r? I'm sure the back would be fine but not too sure on the front. I've searched around but most of what I found was still on stock suspension.

Thanks for the help✌️

swarb · 02-17-2017, 03:00 PM

Quote:

Originally Posted by Veeoh

So I'm getting ready to get my first set of summer wheels. I am looking at the Bremmer Kraft br10. 18x9 42. I'm just wondering if I would have any fitment problems with my car being lowered 1.2f and 1.4r? I'm sure the back would be fine but not too sure on the front. I've searched around but most of what I found was still on stock suspension.

Thanks for the help✌️

At full lock it will be close to the tie rods. It will also be very close to the strut. Some people rub some don't. A small spacer would help. I'm talking about 5mm or so of clearance here... every setup is slightly different.

gramicci101 · 02-17-2017, 03:14 PM

You won't have enough clearance to use camber bolts in the front. You'll have the same amount of clearance on aftermarket springs as you do on OEM springs, because you're looking at clearance from the spring perch, not the spring itself. There are pics in the first post of this thread showing how much clearance there is to the spring perch.

If you want to run a spacer on the front, don't go larger than 3mm without replacing the OEM lugs with longer ones.

02-17-2017, 10:05 AM	#1
Veeoh Member Join Date: May 2016 Drives: 2013 Scion FR-S Location: MD Posts: 42 Thanks: 3 Thanked 10 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	18x9 42offset on H&R super sport springs So I'm getting ready to get my first set of summer wheels. I am looking at the Bremmer Kraft br10. 18x9 42. I'm just wondering if I would have any fitment problems with my car being lowered 1.2f and 1.4r? I'm sure the back would be fine but not too sure on the front. I've searched around but most of what I found was still on stock suspension. Thanks for the help✌️

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
l Ashera Motorsports l H&R Sport & Super Sport Springs for FRS & BRZ l Super Sale!!	Info@Ashera	Brakes, Suspension, Chassis	0	07-01-2015 10:57 PM
H&R Super Sport Springs!!	Mont015	Brakes, Suspension, Chassis	2	10-03-2014 04:22 AM
H & R Sport Springs (not Super Sport)	dewitt	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	4	05-28-2013 10:01 PM
FS: H&R Super Sport Springs	frs4mark	Brakes, Suspension, Chassis	8	05-11-2013 05:17 AM
H&R Sport & Super Sport Springs for FR-S / BRZ @ Guerilla Racing	GuerillaRacing	Brakes, Suspension, Chassis	5	01-11-2013 06:20 PM

02-17-2017, 03:14 PM	#3
gramicci101 Off Topic Join Date: Feb 2014 Drives: 2014 Subaru BRZ Limited Location: Vegas, baby! Posts: 4,610 Thanks: 2,369 Thanked 4,243 Times in 2,170 Posts Mentioned: 43 Post(s) Tagged: 3 Thread(s)	You won't have enough clearance to use camber bolts in the front. You'll have the same amount of clearance on aftermarket springs as you do on OEM springs, because you're looking at clearance from the spring perch, not the spring itself. There are pics in the first post of this thread showing how much clearance there is to the spring perch. If you want to run a spacer on the front, don't go larger than 3mm without replacing the OEM lugs with longer ones.

User Name		Remember Me?
Password