Window won't go up! HELPPPP!

[SpeedDemon26]

So, my passenger window stopped working last week. So today when messing with it it would go down, but not up! It only responds from the passenger side window control too. I've tried using the drive side switch and no movement in either direction and not audable noise of the motor clicking. When I press the button for the window to go up it doesn't move nor make a noise. But when the window was all the way up I was able to fully roll it all the way down (but sadly not back up). I'm completing stumped on what's broke: the window motor, the passenger switch, driver switch, or does my car just hate me for leaving it sitting for two months?

[humfrz]

FIRST OFF, @SpeedDemon26 you only have to post in one section ...... .....if you double post it just gets us old guys confused ....

OK

First thing I'd check is the fuse. It's in the #14 slot (25A) in the fuse box under the hood.

While you're there, might as well check the other sides fuse also (#10 position).

If the fuse is OK, the next thing I would suggest to do it take the switch out and test it.

Then we can go from there .....

Calling @Ultramaroon - he is a window expert .....


humfrz

[Ultramaroon]

Originally Posted by humfrz

FIRST OFF, @SpeedDemon26 you only have to post in one section ...... .....if you double post it just gets us old guys confused ....

Should I change my answer to balance things out?

[humfrz]

Originally Posted by Ultramaroon

Should I change my answer to balance things out?

Nah ......let him look for it.




humfrz

[WesleyG]

Have you checked if the window lock switch isn't accidentally pressed in?

[SpeedDemon26]

Originally Posted by humfrz

FIRST OFF, @SpeedDemon26 you only have to post in one section ...... .....if you double post it just gets us old guys confused ....

OK

First thing I'd check is the fuse. It's in the #14 slot (25A) in the fuse box under the hood.

While you're there, might as well check the other sides fuse also (#10 position).

If the fuse is OK, the next thing I would suggest to do it take the switch out and test it.

Then we can go from there .....

Calling @Ultramaroon - he is a window expert .....


humfrz

Sorry for that! I posted in the wrong area first so tried to repost and delete the wrong one but couldn't..

Originally Posted by WesleyG

Have you checked if the window lock switch isn't accidentally pressed in?

My 2013 Scion FR-S doesn't come with a window lock switch. Unless it's a hidden feature I was never told about haha

[Dadhawk]

Originally Posted by SpeedDemon26

My 2013 Scion FR-S doesn't come with a window lock switch. Unless it's a hidden feature I was never told about haha

Pretty sure it does. This is a photo from mine. Upper left button.

[SpeedDemon26]

I tried both fuses by the way and it didn't fix the problem. I appreciate the idea though!

[Tcoat]

Check the reinitialization process in your manual.

[SpeedDemon26]

Originally Posted by Tcoat

Check the reinitialization process in your manual.

Well ya see I would... But the kind sir that sold me this car didn't include one.

[Tcoat]

Originally Posted by SpeedDemon26

Well ya see I would... But the kind sir that sold me this car didn't include one.

http://m.scion.ca/scion/en/m/owners/manuals can get a pdf manual here.

[Ultramaroon]

Well, did you toggle the nonexistent switch yet? We're all holding our breath here. Slow day in FT86-land.

[SpeedDemon26]

Originally Posted by Ultramaroon

Well, did you toggle the nonexistent switch yet? We're all holding our breath here. Slow day in FT86-land.

Well I found that darn switch y'all were talking about. Buttttttt, still doesn't work

[Ultramaroon]

Originally Posted by SpeedDemon26

Well I found that darn switch y'all were talking about. Buttttttt, still doesn't work

Oh, dammit. It would've been too easy. Well, if you've verified the fuses, are handy with a multimeter, and don't mind removing the driver's side door card we can continue. Otherwise, I recommend a pro.