Dashcam Hardwire Install help?

[Husker BRZ]

I ordered a dashcam and have been looking at ways to hardwire it to the car and came across one option I really like but I'm an electircal noob and was looking for help from one of you electrical geniuses on how I could accomplish this myself!

The dashcam I ordered:
[ame="http://www.amazon.com/gp/product/B00ECCIZDQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1"]Amazon.com : Blackvue DR500GW32G-PMP 32GB Wi-Fi Car DVR Black Box Camera Recorder with Power Magic Pro : Vehicle Backup Cameras : Car Electronics[/ame]

The harness/connector I would like to connect it to:


From other threads I've researched on this "option connector" or (d29) on our wiring diagram is a 6 pin connector and has a ground and accessory slot. (pg.40 of wiring diagram i believe)

Now what I couldn't find was how to wire the dashcam and the power supply to this connector.
1.Which pin location would each wire have to go to?
2. How would I connect the wires securely into the connector?

I want to wire it to this connector so everything will be hidden and I don't have to have tap into the fuse box and keep the fuse box cover removed. Any input anyone can give would be GREATLY appreciated! Thank You!

[ucsmfu]

It's plug and play. The option harness plugs right into the blue connector

[Husker BRZ]

Originally Posted by ucsmfu

It's plug and play. The option harness plugs right into the blue connector

Haha yeah I found the thread explaining that after I posted lol. But I sent the guy an email over a week ago for the connector and haven't heard back yet. How long did it take you to hear back and receive the harness?

[ucsmfu]

Originally Posted by Husker BRZ

Haha yeah I found the thread explaining that after I posted lol. But I sent the guy an email over a week ago for the connector and haven't heard back yet. How long did it take you to hear back and receive the harness?

About 2 weeks or so