Will AMG stock rims fit on my Stock Scion FRS?

[Nicolas0esp1]

So my friend is getting rid of these rims and tiers So he gave them to me and was wondering if I can put them on my car for a drift day at the track? Thx

[thatfilipinoguy]

No, the pattern is like 5x112 or 120. Ours are 5x100.

[Nicolas0esp1]

);

[Vten]

5x112 for sure , and usually the offset is around +35 ... It may work if you don't mind the extra camber and fender pulling ..

[Nicolas0esp1]

Originally Posted by Vten

5x112 for sure , and usually the offset is around +35 ... It may work if you don't mind the extra camber and fender pulling ..

But I heard if the bolt size if off by a bit it could really mess up the car

[Vten]

Originally Posted by Nicolas0esp1

But I heard if the bolt size if off by a bit it could really mess up the car

Naah ... I won't worry too much For a DD ,as long as you have a good adapter with the hub centric ring . Just torqued it around 75-80lbs and check regularly , once a month should be good .

[thatfilipinoguy]

Uhm, you don't to put a 5x112 on a 5x100 hub. You could get them re drilled for your car though, it'll be just like those 5x100/114.3 wheels with 10 holes in it.

[BlueDubbinTDI]

Even if you did all that I'm sure they're heavy as fuck

[Nicolas0esp1]

Originally Posted by thatfilipinoguy

Uhm, you don't to put a 5x112 on a 5x100 hub. You could get them re drilled for your car though, it'll be just like those 5x100/114.3 wheels with 10 holes in it.

I heard that it was like 50-60 bucks per wheel to get them redrilled... Might as well save for new wheels.

What's about bolt adapters?

[red_comet]

@Nicolas0esp1 do some searching on the forums, the questions you want answered have usually been asked.

[SpeedR]

NO.....Bad

[mad_sb]

Sell those on eBay and get something that fits, for that matter (for drift events) buy a set of nearly new oem wheels and tires.. lots of folks selling them on here.. That will give you two full sets of rears to burn off without affecting your DD wheels and tires.