BRZEdit MAP scaling - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jamesm · 08-26-2013, 02:40 PM

My tuner is having a hard time figuring out how to scale the MAP sensor (4-bar omni) on BRZEdit. Is MAP sensor scaling officially supported by BRZEdit? Maybe @epifan can chime in? Thanks.

Sportsguy83 · 08-26-2013, 03:31 PM

@mad_sb

King Tut · 08-26-2013, 04:16 PM

I will await @mad_sb 's response. These kind of questions are the reason I haven't bought BRZedit yet to give tuning my car a shot.

ft_sjo · 08-26-2013, 04:17 PM

Yes the scaling tables are in there. What problem is he having?

mad_sb · 08-26-2013, 04:29 PM

Yeah, there are two tables. One lists the zero volt offset and the other is the volts per bar. It must be a linear output sensor. They are in the 1d tables. Shoot me the sensor model number and specs via pm if you want me to try and figure it out.

EDIT, I found this from a real quick search. this should be what he needs will verrify when i get home:

bar/volt .833
offset (bar) .012

Easy enough to test, check an external barometer, key on engine off turn on logger, compare reading

jamesm · 08-26-2013, 04:34 PM

Quote:

Originally Posted by mad_sb

Yeah, there are two tables. One lists the zero volt offset and the other is the volts per bar. It must be a linear output sensor. They are in the 1d tables. Shoot me the sensor model number and specs via pm if you want me to try and figure it out.

EDIT, I found this from a real quick search. this should be what he needs will verrify when i get home:

bar/volt .833
offset (bar) .012

Easy enough to test, check an external barometer, key on engine off turn on logger, compare reading

it's an omnipower 4-bar map. thanks for your help!

Sportsguy83 · 08-26-2013, 04:36 PM

Quote:

Originally Posted by mad_sb

Yeah, there are two tables. One lists the zero volt offset and the other is the volts per bar. It must be a linear output sensor. They are in the 1d tables. Shoot me the sensor model number and specs via pm if you want me to try and figure it out.

EDIT, I found this from a real quick search. this should be what he needs will verrify when i get home:

bar/volt .833
offset (bar) .012

Easy enough to test, check an external barometer, key on engine off turn on logger, compare reading

This guy is the MAN!

King Tut · 08-26-2013, 04:37 PM

Quote:

Originally Posted by Sportsguy83

This guy is the MAN!

This.

mad_sb · 08-26-2013, 04:46 PM

Quote:

Originally Posted by jamesm

it's an omnipower 4-bar map. thanks for your help!

Yeah, post the model number if you can the data i found was for a perrin omni-4bar. May or may not be the same.

coyote · 08-26-2013, 06:32 PM

Quote:

Originally Posted by mad_sb

bar/volt .833
offset (bar) .012

I'm almost certain that is correct.

Can check later today.

Sent from my Nexus 4 using Tapatalk 2

jamesm · 08-26-2013, 06:47 PM

the part # on the sensor is 'MAP-K-4BAR', two other numbers on the package are 'P0-000022227' and '032113'. hope this helps. thanks!

RAN94A · 10-02-2013, 04:22 AM

@mad_sb

would this be the same for the 3 bar AVO sensor??

http://www.avoturboworld.com/avoshop...ual-p-191.html

mad_sb · 10-02-2013, 01:35 PM

Quote:

Originally Posted by RAN94A

@mad_sb

would this be the same for the 3 bar AVO sensor??

http://www.avoturboworld.com/avoshop...ual-p-191.html

i would imagine not, 4 bar vs 3 bar will have different scale factor for sure.

AVOturboworld · 10-02-2013, 01:43 PM

3 bar has different scaling than the 4 bar.
3 bar setup:
pressure (bar) offset: -0.0113
scaling: 0.629

08-26-2013, 02:40 PM	#1
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,293 Times in 1,180 Posts Mentioned: 313 Post(s) Tagged: 4 Thread(s)	BRZEdit MAP scaling My tuner is having a hard time figuring out how to scale the MAP sensor (4-bar omni) on BRZEdit. Is MAP sensor scaling officially supported by BRZEdit? Maybe @epifan can chime in? Thanks.

08-26-2013, 04:16 PM	#3
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s) Tagged: 10 Thread(s)	I will await @mad_sb 's response. These kind of questions are the reason I haven't bought BRZedit yet to give tuning my car a shot. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

08-26-2013, 04:29 PM	#5
mad_sb Senior Member Join Date: Jan 2013 Drives: 2013 Asphalt FR-S Location: Orange County Posts: 1,639 Thanks: 632 Thanked 982 Times in 537 Posts Mentioned: 100 Post(s) Tagged: 0 Thread(s)	Yeah, there are two tables. One lists the zero volt offset and the other is the volts per bar. It must be a linear output sensor. They are in the 1d tables. Shoot me the sensor model number and specs via pm if you want me to try and figure it out. EDIT, I found this from a real quick search. this should be what he needs will verrify when i get home: bar/volt .833 offset (bar) .012 Easy enough to test, check an external barometer, key on engine off turn on logger, compare reading __________________ ~Namaste~ 2013 Asphalt FRS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BRZedit Drive By Wire Info	mad_sb	Engine, Exhaust, Transmission	20	03-20-2021 02:19 PM
BRZedit E85 How-To	mad_sb	Engine, Exhaust, Transmission	9	04-24-2020 10:30 PM
BRZEdit (ECUEdit)	illmatic	Software Tuning	246	06-02-2016 02:15 PM
BRZedit Cam Tuning Info	mad_sb	Engine, Exhaust, Transmission	11	01-25-2015 05:58 AM
who does remote BRZedit tunes?	StormTrooper	Engine, Exhaust, Transmission	14	07-14-2013 05:14 PM

08-26-2013, 04:17 PM	#4
ft_sjo Banned Join Date: Oct 2012 Drives: GT86 Location: The Motherland Posts: 1,398 Thanks: 140 Thanked 473 Times in 271 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	Yes the scaling tables are in there. What problem is he having?

08-26-2013, 06:47 PM	#11
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,293 Times in 1,180 Posts Mentioned: 313 Post(s) Tagged: 4 Thread(s)	the part # on the sensor is 'MAP-K-4BAR', two other numbers on the package are 'P0-000022227' and '032113'. hope this helps. thanks!

10-02-2013, 04:22 AM	#12
RAN94A Grand PooBah Join Date: Jun 2012 Drives: Toyota 86 GT MT Location: Sydney Posts: 424 Thanks: 157 Thanked 225 Times in 113 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	@mad_sb would this be the same for the 3 bar AVO sensor?? http://www.avoturboworld.com/avoshop...ual-p-191.html

10-02-2013, 01:43 PM	#14
AVOturboworld Join Date: Jan 2012 Drives: 2013 "AVO Orange" FR-S Location: Seattle, WA Posts: 1,067 Thanks: 69 Thanked 2,277 Times in 636 Posts Mentioned: 108 Post(s) Tagged: 2 Thread(s)	3 bar has different scaling than the 4 bar. 3 bar setup: pressure (bar) offset: -0.0113 scaling: 0.629

User Name		Remember Me?
Password