OFT strange IAM and FLKC readings...any help?

[Phil0rd]

USDM '16 BRZ Manual, Calibration Code F40C
Running OTS E85 UEL Tune with Gruppe-s UEL header

I recently started to pay close attention to the data displays and found some disturbing numbers:

--Adv Multiplier: 0
--FLKC: -5, jump to 5 or 0 if I let go the throttle (I guess -5 ~ 5 is the max and min OFT can display, data log actually shows -100)
--KC Learned: 0, quick blip if I step on the throttle
--O2S2: 0

Log here:
http://datazap.me/u/phildu/f40c-e85-uel-1
1st gear drive around

From the numbers it looks like there is a serious knock problem, but the car drives perfectly fine. Never had any sign of knock. Knock Correction is always 0, unless I kick the throttle on high gear low RPM, which bring it to a very small value.

Things I have tried:
--Keep OFT updated, now the firmware is 1.40
--Update the template. Can't find this on OFT website anymore, but tried this one uploaded by Steve: http://www.ft86club.com/forums/showthread.php?p=2545079
--Switch to original tune and back. When running the original tune, ST Fuel Trim rises drastically, so I guess the at least the first O2 sensor is working properly..?

Any input would be helpful, thanks!

[Boomerang]

some logging doesn't work on new Roms
known issue
contact Shiv
Good luck