2nd Gen GR86 / BRZ - STR Thread

[Tomyyyu]

Figured I’d start a thread here too for people to post.

I’m in a 23 GR86 Premium with the following mods:

RCE T2 7/9k
22MM FSB Perrin on soft
Stock rear bar (15mm)
17x9 RPF1 245/40/17 A052
Vorshlag high caster camber plates
SPL End Links front and rear (short ones for the front)

Alignment is:

Front
-4.5 Camber
0 toe
7 caster

Rear
-1.1 camber
0.40 toe in total

Height:

LF - 141mm
LR - 146mm
RF - 144mm
RR - 149mm
Rake - 5mm
Total Weight w Driver (7 gallons) - 3,014


Sent from my iPhone using Tapatalk

[TRACE_on]

- Shaftworks single adjustables 6k/9k
- Karcepts front bar with larger center section and SPL endlinks
- SPC Front camber bolts
- RacerX rear upper arms
- Perrin 16mm rear bar with SPL endlinks
- Whiteline rear subframe bushings
- Shaftworks-tuned OS Giken LSD
- 17x9 +45 TWS T66-F with a 10mm spacer in front
- 245/40/17 Yokohama A052s
- ARP extended studs with CSG lugnuts
- JDL UEL catted header
- JDL dual-resonated front pipe
- Borla S-Type catback exhaust
- 93 octane tune by Zach at Counter Space Garage (7800rpm redline)
- Stock brakes

Alignment:
-4.5 front camber
0” total front toe
-2.5 rear camber
2/16” total rear toe

For 2025, I am planning to bump up the front camber to -5.0 and see how that feels.