ECUtek speed density tuning tool

[Kodename47]

Originally Posted by Matt@Cosworth

thank you for the replies

the main issue I have at the moment is as ECUtek have recoded the map access logs the current release of the mafscaling tool no longer works when reading in the log file
as it comes up with no identified channels in the log file


megalogviewer does look like it'll do whats required though so I'll see if my boss will stretch to paying for it.....

Open the csv file in excel or any other spreadsheet program and take out the top lines so that the column headers are in the top row

[COO86L]

Originally Posted by Kodename47

Open the csv file in excel or any other spreadsheet program and take out the top lines so that the column headers are in the top row

You sir, are a foot aka leg end aka legend!

[Kodename47]

Originally Posted by COO86L

You sir, are a foot aka leg end aka legend!

It surprised me too. Not sure why ECUtek decided to add the new info at the top. I guess it's to help those that deal with multiple platforms etc. OFT users have had to do this for some time as the tablet places similar info at the top.

[Matt@Cosworth]

Originally Posted by Kodename47

Open the csv file in excel or any other spreadsheet program and take out the top lines so that the column headers are in the top row

marvellous!

thanks ever so
and yes your're right the stat analysis tool gets you about 80% of the way there so I'll give that a go for settting the SD table up