Quote:
Originally Posted by #my86build
Thanks for the info and part numbers, I'm assuming. If those are indeed part numbers, my OCD thanks you. I didn't know there was a 500 mile break in period. Is there a certain RPM that I should not be passing during this time?
|
Not RPM limited... general rules:
1) After install, drive for 30 minutes at highway speeds to get the gears up to operating temp followed by a full cool down of at least 3 hours parked.
2) repeat the 30 minute highway drive/3 hour cool down a total of 3 times.
3) No burn outs/hard launch/hard shifts for first 500 miles...
After break in I switched to Motul 300 synthetic gear oil...