A plug and play harness that isn't plug and play, brought to you by: SUBIMODS! The same group that told you to mount a non-sealed relay in the way of the elements. Typical. Cut that connector off, crimp on a spade, and insert it into the connector of the low horn.
Alternatively, return this harness and buy a few feet of wire and connectors from home depot. You don't need the relay. This has been proven time and again.
__________________
SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)
|