[Irace86.2.0]

I bought a few items over the last week.

--I bought a used ECUTEK cable and dongle off a forum member. I also confirmed that I will need to upgrade the MAP sensor to run the 85mm (11.5 psi) pulley. DT has a 10 psi sensor, and they have a 4 bar sensor, which is the one I will need to buy.

--I got a pair of universal catch cans off Amazon from K-Motor. They seem to be nice quality, and they came with a lot of features for a good price.

--I bought the WRX PCV valve and a one way check valve. Hopefully this isn't overkill, but I'm going to install both.

--The wife and I went to a pick-n-pull and found some water pipes. I plan to make a custom setup for the water pipes on the Harrop kit to make for a cleaner look.

--I bought a lightweight 11lb Braille battery. The plan is to make a custom battery tray and tuck the battery in the corner, so there is plenty of room for the water pump, which I will be relocating to a spot near the battery.