Quote:
Originally Posted by Traktor
I installed my header two weekends ago and have experienced some rubbing. There was some minor contact on the skid plate which I flattened out, but the rubbing noise remains. I removed the skid plate last night to rule it out as the source, but am still hearing rubbing.
I was really hoping it wouldn't rub as this is a daily drive for me.
Type B 250 with only 800 miles.
Sent from my iPhone using Tapatalk
|
Probably the OP rubbing on the subframe. Loosen everything up and see if you can move it away from the subframe before re-tightening it. If that doesn't help, you may need stiffer engine mounts.