Quote:
Originally Posted by Jaunt86
I’m at 450’. I didn’t get a boost reading yet.
She runs! Pretty rough, no codes.
I tried about cranking it about 15 times to get it to go. It slowly showed progress, so I was thinking it’s a fuel issue getting the rails primed... don’t know
I ran it for a few minutes with a little improvement. Turned it off and was able to restart a few minutes later without issue.
I’ll get a data log to the tuner and report back.
|
Check around and make sure you don't have any fuel leaks and that you didn't install the Mas airflow backwards.
Plug should be toward the driver side.