Given how much positive feedback I got on the topic about wheel fitment for
PP Brembos,
and how many things most people still don't know about them,
I decided to start a new topic about the brakes themselves.
OEM Subaru part numbers- 26292CA070 caliper front left
- 26292CA060 caliper front right
- 26261FE000 caliper bracket / tie bar front
- 901120131 front caliper M12x54 bolt (need 4)
- 26300FE001 rotor front (single, need 2)
- 26296FE100 pads front (4 pads)
- 26232FE010 front pad retaining clip
- 26231FE030 front caliper pin (need 4)
- 26231FE040 pin retaining clip (need 4 in the front, same in the rear)
- 26540CA030 brake hose front left
- 26540CA020 brake hose front right
- 26290CA030 rotor dust shield left front
- 26290CA020 rotor dust shield right front
- 26297CA010 caliper repair kit front
- 26692CA070 caliper rear left
- 26692CA060 caliper rear right
- 901000326 rear caliper bolt (need 4)
- 26700CA000 rotor rear (single, need 2)
- 26696FG000 pads rear (4 pads)
- 26632FE001 rear pad retaining clip
- 26631FE000 rear caliper pin (need 4)
- 26231FE040 pin retaining clip (need 4 in the rear, same in the front)
- 26541CA050 brake hose rear left
- 26541CA040 brake hose rear right
- 26704VA010 rotor dust shield left rear
- 26704VA000 rotor dust shield right rear
- 26697FG000 caliper repair kit rear
- Anything else worth mentioning?
See exploded views for other minor stuff like bolts, pins, etc.:
front,
rear.
Torque specs
Front caliper bolts: 88.5 ft·lb or 120 Nm (19 mm socket)
Rear caliper bolts: 53.8 ft·lb or 73 Nm (17 mm socket)
Bleeder valves: 14.8 ft·lb or 20 N·m (11 mm)
The rotors have two M8x1.25 holes each for bolts to simplify removal.
Piston sizes
4x40 mm front [citation needed]
2x40 mm rear [citation needed]
Compatible rotors
Fronts are 326x30mm, rears are 316x20mm
- Centric C-TEK Standard 121.47019 front
- Centric C-TEK Standard 121.47043 rear
- Centric Premium 125.47019 front
- Centric Premium 125.47043 rear
- DBA 654-10 front
- DBA 4654S-10 front
- DBA 5654GLDXS-10 front
- DBA 42656S-10 rear
- Girodisc A1-007 5x100 front (more info)
- Girodisc A2-095 5x100 and 5x114 dual drilled rear (more info)
- Paragon 2-piece front (link)
Compatible pads- FMSI D numbers: D1001 front, D961 rear
- WVA codes: 23092 or 23325 front, 21580 or 23323 rear
- CSG.C1.1001.15 front
- CSG.C2.1001.15 front
- CSG.C2.961.14 rear
- CSG.CE2.1001.15 front
- CSG.CX1.1001.15 front
- CSG.CE1.961.14 rear
- DBA DB1678XP front (link)
- DBA DB1521XP rear (link)
- Ferodo DS2500 FRP3067H front
- Ferodo DS2500 FCP1562H rear
- Hawk HPS HB453F.585 front
- Hawk HPS HB180F.560 rear
- PowerStop Z23 Z23-1001 front
- PowerStop Z23 Z23-961 rear
- PowerStop Z23 Z26-1001 front
- PowerStop Z23 Z26-961 rear
- Project U Racing 999 R906
- Project U Club Racer PCR09F906
- StopTech Sport 309.10010 front
- StopTech Sport 309.09610 rear
Compatible kits- Centric front hardware kit 117.47018
- Centric front dust boots and inner seals kit 143.34039
- Centric rear dust boots and inner seals kit 143.35031 (same as half of 143.34039)
Please post any other useful information you might know about these!