Quote:
Originally Posted by Ikaros
The numbers I was reffering to is for the first table (Ignition Timing Post Start).
Some post has it as 0 (like the OFT tips and trick thread), some at -4/-6 (@steve99 in some post) and @ troek had it at +8 in this thread.
Also for the changes to the MAF Correction After Start tables, what do they actually do to the sound? Since it's so hot right now I don't I can hear the difference even if I flash them. Does it affect the droning noise at cold starts? |
The post start ignition timing changes the sound I find -4 give nice sound and very little drone/bark during startup.
Maf offset is like choke in old cars adds fuel during warmup.
If you get cold temps like below zero C then maybe leave 15 to 20 in the top two lines of the table on left hand side. If you leave the stock values car will still idle high even though you set idle tables to lower values