View Single Post
Old 09-08-2014, 12:45 PM   #9
Majik
Member
 
Majik's Avatar
 
Join Date: Jul 2014
Drives: '14 Subaru BRZ SWP Limited
Location: Long Island, NY
Posts: 55
Thanks: 15
Thanked 14 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by DarkSunrise View Post
For fuel efficiency:

1) When accelerating, be light on the throttle and upshift at 2500-3000 RPM.
2) When cruising, upshift to the highest gear that will keep you above 2000 RPM.
3) Note: if you encounter an incline, downshift to avoid lugging your engine.

For maximum acceleration:

1) Downshift into the lowest possible gear that will keep you below 7400 RPM, press the throttle fully, and upshift when the tach hits 7400 RPM.
2) Note: make sure you understand the gearing in the car. If you exceed 7400 RPM on your downshift, there is a good chance you will damage your engine.
Follow this advice to a T and you should get everything you asked for. Also be careful, Long Island drivers suck.
Majik is offline   Reply With Quote
The Following User Says Thank You to Majik For This Useful Post:
MrAnthonyC (09-09-2014)