Quote:
Originally Posted by RedReplicant
The motor measured at 205-210 across all 4 bone cold. It smokes a bit at heavy load, so I think the rings are not in the best shape, unfortunately. Doesn't really hurt anything, but it still makes me want to put another motor into it.
205/175
|
That's really healthy! Sounds like either you have leaking valve guide seals or control rings, but either way it's no big deal. I eat about 1 quart of oil per 750 miles on mine; pretty excessive! We did a cylinder leak down test and it showed I have leaking valve guide seals on every cylinder lmao. So I have a 4Piston head on the way. Just gonna swap it onto my stock block with a set of Todo D cams and call it a day until the bottom end goes.