Quote:
Originally Posted by strat61caster
The difference in the front end camber/caster is unusual, I think that may be a symptom of your underlying issue. Most alignment sheets I've seen (mine included) are dead even left/right across the fronts unless an adjustable element is added and out of whack. Not sure if you already got that lifetime alignment deal but swapping back to OE struts and top mounts in the front would imo eliminate the front (and if you feel like doing the rears too) Teins as a potential cause. Then you'd be looking at the knuckle/hub, lower control arm, steering rack and rods, and subframe.
Again, good luck.
|
That is my next step. Should I put the stock sway bars back on as well in the front? Knuckle, wheel bearing, lower control arm, steering rack and rods have all been replaced.