Quote:
Originally Posted by NoDemand
Hey all, I want to order a set of Cosmis XT-006R's. Sadly no +35 offset is made. Will I be able to achieve a flush/nearly flush look with these? I was thinking of running them with a 225/40 tire.
Will I be able to get the front to become flush with a little bit of camber?
|
I am running 18X9 +30 front and 18x9 +27 rear with 245/35/18 front and rear.
This offset wheel will fit with springs and still have room for negative camber. So, unless you have coils, you will also want camber bolts. Are you lowered?
You will want some negative camber in the rear too. You get around -2 rear camber from lowering your car 1" on springs; a good way of adding some. You could also add rear LCA, these will allow you to dial in the negative camber on the left and right sides to be even. (often when lowering , the negative camber achieved is not the same from side to side.)
In this pic; My rear camber is from lowering 1" and my front is from 1 set of camber bolts.