SOLD
Selling a turbo I bought for my setup that I'm not going to use and have not connected to anything; no fluids have been run through it. It's a turbo put together by a specialist company named Boostlab- the turbo is modeled after a generic Garrett T3/T04E frame but has the milling to fit a larger Precision style compressor and exhaust wheel.
As you've probably put together, this should perform similarly to a PTE5858.
It is configured as follows-
T3 flange
T31 exhaust housing w/ 2.5" discharge in .63 AR
T04E style compressor housing with 3" inlet / 2"outlet
I took the following measurements
Compressor wheel
Inducer-56mm
Exducer-80mm
Exhaust wheel
Exducer-56mm
Inducer-64mm
Link to product -
https://www.theboostlab.com/bl-5858-billet-turbocharger