Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - OFT Tune Stage 1 - Question Regarding CALID Tunes / Definitions and Changes to maps

YwllowFox · 10-24-2021, 11:08 AM

Hi Steve99

Thanks for the reply.

Good to know that about the 700G.

I've looked them up and the idle target tables as well as the post start ignitions are there but not the maf correction after startup. I'm using the definitions file from the OFT Tunes.

I've found that the Tables are defined in the romraider defs (RR_ZA1JA01G) but there are quite alot of changes and I'm not sure if I could use them just like that... Do you know if there could be a problem when the definitions for the MAF correction after start tables in my def/tune?

And is there a way in which the OFT checks if you are using the correct file for the ECU given?

Thanks a lot.

10-24-2021, 11:08 AM	#3
YwllowFox Junior Member Join Date: Oct 2021 Drives: GT86 2012, Stock Location: Bern Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hi Steve99 Thanks for the reply. Good to know that about the 700G. I've looked them up and the idle target tables as well as the post start ignitions are there but not the maf correction after startup. I'm using the definitions file from the OFT Tunes. I've found that the Tables are defined in the romraider defs (RR_ZA1JA01G) but there are quite alot of changes and I'm not sure if I could use them just like that... Do you know if there could be a problem when the definitions for the MAF correction after start tables in my def/tune? And is there a way in which the OFT checks if you are using the correct file for the ECU given? Thanks a lot.