Quote:
Originally Posted by Adamf220
Here is my solution, 1/2" heim joints with a turnbuckle cut to lenght. Drilled a hole in the A Arm and bolted it up. Had to mount the heim on the inside of the sway bar to clear and it has miles of clearance now. Taking the car to the track tomorrow ill report back on how it works. Should be fine though.
|
If it works you should charge them a fee for fixing there obviously lack of QC...
Sent from my GM1915 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's