Quote:
Originally Posted by Tcoat
I should have looked at the pictures on the computer vs my phone before I commented before. On the phone it looked like the bolt was sticking up through the flat part of the casting with load of clearance. Seeing it on the computer gives a whole different perspective.
I totally agree that helicoil is the way to go now.
|
So far the bolt has held the tension it needs to, if the seal for the oil pan were to give and leak oil again. Ill go ahead and install the helicoil as the threads have been tapped to an m7 already. My main concern at this point is the cracked off ear and if that should be of any concern since oil is flowing in and out.
Sent from my SM-G960U using Tapatalk