Quote:
Originally Posted by ls1ac
Ok each heating panel is 13 ohms times two (series) 26 ohms. Two sets per side. 480 divided by 26 is about 18, times two sets (parallel) is 36. both sides come together at the relay so times two is 72 when cold, as they heat up usually the resistance increases.
Second part.
If the panels short then full voltage is through one panel instead of one half. if it opens (more normal) then only the total amps will drop, all other panels will still act as normal.
|
Thank you
That's what I thought. I am more of a low voltage DC controls guy, and even then just barely