Quote:
Originally Posted by 403
Obviously temporary, but what size wheel spacer would I need to get a flush look on my FRS.
RBv1 Front Fenders +45mm
Rear Fenders +70mm (according to shopgreddy)
Current Wheels: SSR GTX01 18x9.5 +40mm
If anyone knows and/or wants to give me a hand it would be much appreciated.
Planning on going with a wider 18x10.5 in the rear eventually but yeah this is just temp.
|
going by my math, on stock fenders you should be flush with the wheels you just specified, so you would need 45mm spacers for the front and 70mm for the rear, however running 70mm of spacers is going to put a lot of unnecessary stress on your hubs. so good luck with that. as for wheel specs if you move up to 10.5 you will want about -2 to -10 offset to make it flush.