Quote:
Originally Posted by Daily86
Great write up, however, when I order the gaskets this is what I got. None of these were correct. The drain and overflow plugs are actually crush washers, both the same size. The fill plug is an o-ring, but none of these were correct.
|
Howdy,
Sorry about that. I'm not sure if these part numbers changed or what. I just looked it up and the drain and overflow plugs both use the same crush washer which is part number
17008AA000.
I'm still looking to find the o-ring for the fill plug. The good news is you can re-use the ones that are on there without too much trouble, usually.