View Single Post
Old 06-12-2020, 10:50 PM   #62
DarkSunrise
Senior Member
 
DarkSunrise's Avatar
 
Join Date: Apr 2012
Drives: 22 BRZ (Previously 13 FR-S)
Location: USA
Posts: 5,794
Thanks: 2,164
Thanked 4,242 Times in 2,220 Posts
Mentioned: 48 Post(s)
Tagged: 2 Thread(s)
Coming up on my first track day in a long while! Buttonwillow CW13. Very excited to try out this track. It'll be an open lapping day, so expecting a lot of seat time. In preparation, I knocked out some maintenance items:

- Changed tune from e85 back to 91
- Replaced rear rotors (Centric blanks)
- Swapped to track pads (F Wilwood BP20 / R Carbotech XP10)
- Trans and diff oil change (Motul Gear 300)
- Swapped back to track wheels/tires (17x9 Apex ARC-8 / Hankook RS3 235/45/17)
- Brake fluid change (ATE Type 200)
- Alignment

For the alignment, I went to West End and dealt with Chris. Great guy, very knowledgeable and easy to work with. For the alignment:

-2.8 degrees front camber, 0 toe
-2.0 degrees rear camber, 1/16" toe-in

I was a little hesitant on adding toe in the rear (I typically like 0 toe), but Chris thought it might be better for traction on corner exit.

Will give the car a shakedown in the canyons before hitting the track, but everything seems ready to go.
__________________
"Never run out of real estate, traction, and ideas at the same time."

2022 BRZ Build
2013 FR-S Build
DarkSunrise is offline   Reply With Quote
The Following User Says Thank You to DarkSunrise For This Useful Post:
Racecomp Engineering (06-15-2020)