View Single Post
Old 10-18-2017, 04:35 PM   #61
DarkSunrise
Senior Member
 
DarkSunrise's Avatar
 
Join Date: Apr 2012
Drives: 22 BRZ (Previously 13 FR-S)
Location: USA
Posts: 5,794
Thanks: 2,164
Thanked 4,242 Times in 2,220 Posts
Mentioned: 48 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by jmark View Post
I know my son's Apex rims with 245/40R17 tires & RCE Yellow springs limit the camber to < 1 due to the close proximity to the tower. I am thinking the 235/40R17 might be a better compromise to get more camber. Just wasn't sure about that tire size on a 9" wide rim.
Yeah that sounds about right. When I was on stock suspension, I had 235/40/17 Nitto NT05 tires on my Wedssport wheels (17x8, +42 offset). I was at -1.5* camber in the front using crash bolts and clearance was tight, maybe 5 mm or so between the tire and strut.

If your son wants about -1.5* camber, I think the 235/40/17 tire size could work. It'll run slightly wider on a 17x9 wheel, but there should be just enough clearance to make it work. Some tires run wide though so be careful with tire selection. (Also in case you're worried about it, there's no issues mounting a 235 width tire on 9" wheel.)
__________________
"Never run out of real estate, traction, and ideas at the same time."

2022 BRZ Build
2013 FR-S Build
DarkSunrise is offline   Reply With Quote
The Following User Says Thank You to DarkSunrise For This Useful Post:
jmark (12-03-2017)