Quote:
Originally Posted by sneaky_pete
I changed out the clutch spring for an MTEC clutch spring and then adjusted the clutch pedal so it grabs closer to the firewall. much improved take offs and gear changes.
|
hey, any how to, or video on this to do it PROPERLY?? I know there are two adjustments. One is the rod that actually goes thru the firewall above the gas pedal and there is the other adjustment at the clutch pedal switch.
I don't want to take away all the free play in the rod, as then the clutch won't fully engage. and too much free play won't allow it to fully disengage. Its kind of hard to know what the free play is because of the spring.
I'd like to tune this nicely. Its not bad but its a little off. I'm a good manual trans driver, and I know its not my bad technique
thanks!