View Single Post
Old 06-04-2020, 02:04 AM   #36
Turdinator
Seņor Member
 
Turdinator's Avatar
 
Join Date: Aug 2012
Drives: 86 GT/'74 TA22 Celica/Kangaroo
Location: Melbourne, Australia
Posts: 1,706
Thanks: 1,104
Thanked 764 Times in 478 Posts
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Garage
I have the same wheels and older MCA X-C coilovers that would be similar spec valving to your street essentials. I have 6kg front and 5kg rears.

The first thing I noticed about your alignment specs is the Castor seems a little low. Mine has been closer to 6deg with every alignment I have ever had. It might be worth checking you have the strut tops at the right orientation. As for toe and camber I have as close to 0 toe all around as they can manage and about 2.5deg front and 2deg rear camber. On a long sweeper the car will understeer but it feels very sharp on transitions and turn in. That is with the recommended damper settings. Is the 2 clicks from soft the recommended setting from MCA?

Quote:
Originally Posted by solidONE View Post
There are a lot of things you can adjust. Just do em one at a time. lol
This is good advice ^^^
__________________
1974 TA22 Celica
2013 86 GT
Turdinator is offline   Reply With Quote
The Following User Says Thank You to Turdinator For This Useful Post:
solidONE (06-04-2020)