Quote:
Originally Posted by UT_BRZ
I'll be done with class here in a few more hours. I gotta find a site to upload what I have so it will be sometime tonight. I did the best I could to tidy up the rats nest of wires. I purchased a second 6 pin Metra harness and wired pin 4 & 5 to clip into the obd plug right next to the stereo harness. It is referenced on http://www.ft86club.com/forums/showp...4&postcount=18 |
Did your Maestro T01 harness include the direct OBD2 connector and you just didn’t want to run it down to the OBD2 port? I ask because I think they used to just include bare wires, but the harness that I received actually has a direct clip-on connector for the OBD2 port. So from what I’ve gathered, your Maestro RR install is a mix of Metra and Maestro parts?