Quote:
Originally Posted by Crashdummy
Are there any plans to produce one for the RS1.0 front end?
|
It's possible to do it. Just gotta buy the hardware. It's not going to be flush though. I'm not sure how much longer it is from the Nur Spec lip (mine was about 1-2 inch gap from what I can remember. I changed out the bolts from 25mm(included with the kit) to 60mm or 80mm bolts (still a m6 bolt). You are going to need some spacers (with an ID of 6mm or slightly bigger) to hold the splitter straight and have a stop to the turning of the bolts or else it will keep on turning n turning and eventually make it's way through the splitter.
Here's mine installed with the Nur Spec lip.
