What are the two stubby bolts in the adapter plate bolt set. There are four Allen 10 sized bolts that hold the adapter on. There is a big bolt on the exhaust side going from the block into the adapter. There is the stock weird long Honda bolt for the starter and their replacement bolt for the lower part. I haven’t mounted the transmission, but it seems like there are many bolts all of the same size. Then there are two stubby flange bolts. What are they for? I know Captain mentioned it, but anyone figure it out? Anyone email Kpower? Are they for something else like for a ground or something? Maybe on the trans mount?
Also, in the engine bay there are two chassis grounds on the frame rail. Do these get removed or used?
Also, ARP 19mm flywheel bolts don’t fit unless you grind down the center, so just get 17mm sized OEM K20 flywheel bolts.
|