|
Would it be possible to install a waste gate on the intake side instead of a bypass to regulate the top end psi? From what I remember bypass is either open or close, but I could be wrong.
For example 1 Pulley setup for 7 psi at 7400 rpm and makes 4-5 psi at 4000-5000 rpm
example 2 with waste gate: pulley for 12 psi at 7400 rpm and makes 6-7 psi at 4000-5000 rpm, but have the waste gate regulate it at 8psi like a turbo setup.
Is this even possible? Sorry If I don't make any sense.
|