BTW, a little nugget here. i have a MY16 MT BRZ with F00C ECU, JDL Catted UEL + UQFP + perrin silicone tube + Drop in and found that OTS stage 1 MAF is a good base MAF Scale.
still a bit rich and lean in some areas >3 V, minor tweaks, but 2.77 V and below, using Wayno's ol school smoothed Stage 2, which is a bit leaner than Stage 1 helps in the CL.
attached MAF vs Voltage guide. something i could not log on ots2, but is available now on OTS 4.0
Last edited by neilvosko; 05-17-2018 at 02:52 PM.
|