Quote:
Originally Posted by sierra
All that I can think of is to dump any air pressure so it doesn't confuse the MAF sensor and stuff up the mixture?
|
Which seems odd. I would think extra air pressure pushing through the filter would be benificial.
Quote:
Originally Posted by brz_star21
Not exactly sure if it works but essentially the theory I'm getting from the translation is since the holes are at the top it will reduce the chances of hydro-lock in flooding or inundated conditions.
|
Quote:
Originally Posted by sierra
I left that one out to aviod being abused and the top edge of the intake is so high it would only work for a very limited level which would probably write the car off anyway as it floated before sinking.
|
I also read that. If you're driving through water that deep i don't think those three little hose will you help much.
