solidsnake11: Way i see potential problem - given finite amount of oil and at specific pressure pumped, imho there is chance to mistakenly give "too much" oiling for some paths/bearings .. resulting in opposite, oil starvation, where there was sufficient in stock. I don't have any expertise, i don't have knowledge/experience/budget/means to experiment and get objective data like toyobaru engineers did (and so did probably eg. king bearing vendor), so i'd probably be much more cautious when doing mods based just on hunch / how it "seems to me" it should be better. Eg. even if enlarging some oil paths, then only relatively very slightly, and so on.
|