Quote:
Originally Posted by gramicci101
There's a much easier way to do it.
Use your metra harnesses to create a passthrough for the door speaker amp. Conveniently, this amp is located behind the rear seat on the driver's side. Here's a thread that covers how to repin the harnesses and in what order. Unlike that thread, you need to connect the 1760 to the 1761 to allow the signal to still pass to the door amp. Branch off the wires for L+, L-, R+, R-, and remote turn-on and connect these to your sub amp's harness. Don't cut them completely, because you still want the door speakers to work.
Then run power and ground wires for the sub amp, plug your passthrough in between the door amp harness and the door amp, and you're good to go.
I can get pics when I get home. |
Honestly this is amazing. Definitely worth a sticky!
My only problem is my sub amp does not have a harness, it requires RCA's. But I guess I can simply connect it to the R and L +/- where your amp harness would go instead.
Thanks a bunch!! I will be doing a very similar install and will post results.