Quote:
Originally Posted by captain awesome
Also for those curious about trans clearance. It's a shitty pic but it's a pic nonetheless.
|
Hey it’s still a better pic than what we were shown in the manual. I’m starting to think that maybe my trans is touching the chassis, dealing with a lot of knock which I wouldn’t think I should have. My engines exactly the same as what kpower used other than 550cc injectors and a non dampened crank pulley. I know the crank pulley could be causing some extra vibrations in the engine. I probably just need to adjust the knock detection within Haltech.
I’ve been letting the ECU learn LTFT and then applying what it learned to the base map and AFR’s are looking great, just gotta keep playing with the knock. Been afraid to go higher than 5k due to the knock but I’ll figure it out, most likely just background noise.