Perfect. When swapping injectors the other day I tested to see if my Deatschwerks fuel damper would fit at the center port of the rail. It sits nice and tidy in there so now I can just add the sensor at the end of the rail. My tuner said he's rail mounted them a bunch of times and wasn't worried about vibes killing it. I'll go the easy route on this one and see how it goes. Luckily AV1 is wide open for me so wiring will be pretty easy.
Quote:
Originally Posted by Irace86.2.0
This is what I got. It is just T'd into a brass port inline with the feed line about four inches away from the rail. This was fine for what Shawn requested.
When I finish the setup, I think I will be using the two ports on the regulator for the sensor and for the gauge, and the return will go off the back of the rail from the bottom of the regulator. The damper will get a -8AN ORB T and a feed will go to the front. I'm not going to mess with the center port.
https://www.tunedbyshawn.com/product...ressure-sensor
|