|
OFT - Control Minimum RPMs?
I recently had my JDL header installed, and flashed to a stage 2 tune with OFT. On my first test drive, when I stopped at a red light the RPM's went pretty low (~400 RPM) and the engine seemed to bog down and stutter for a second (CEL briefly flashed). It got better with time though, perhaps the engine learning? Either way I figured that I would just edit the minimum idle rev tables in RomRaider. Now the car idles just a bit higher like it should, but only after it first dips down to 500 RPM when I brake to completely stop at a red light, or in the time between going from engaging the brakes at a stop to engaging the throttle. I haven't logged anything yet but that's the next step. I figured some/most of you may have already dealt with a similar situation. Thank you for the input!
TL;DR - within RomRaider can I edit table values so that the RPMs never drop below ~700 RPM?
|