Quote:
Originally Posted by Jfheisenberg
I tried this already, and didnt make a difference.
This is very interesting. I did two hard pulls and on those scenarios, i do not feel the sluggish problem. I am more confused now...
Its possible that the issue is still there, but since i'm accelerating hard i do not notice it on those cases. Seems like the issue is mostly felt when i drive the car 'normaly', when i hit the gas hard, it appears i dont feel the problem.
I did noticed that after driving hard for a bit, my idle problem got a bit worse. It's all strange
That datazap.me tool is great, i was able to upload the two pulls and it shows a graph:
https://datazap.me/u/jframonex/brz-pull-1?log=0&data=1-13
https://datazap.me/u/jframonex/brz-p...og=0&data=1-13
Does this mean anything?
|
I am no expert but a couple things I noticed.
Zooming into a pull I can see AFR looks good, no Knock correct and your adv. multi moved from .7 to .89 meaning your fueling looks good...
Next let the car sit till cold. Turn it on and let it just idle for about 10-15 mins. Log it and post it like you did the pulls.
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's